Small One and Done Projects
These replacement end caps were designed to fit common carbon-fiber and fiberglass tent poles. They allow the internal bungee cord to be reattached after replacing a damaged pole segment. The cord passes through the opening in the cap and is secured at the end of the final pole section.
This simple protector addresses a small issue I have experienced while traveling with the Arctic Summair Plus Fan. The front "grill" can be pressed into the blades themselves causing interference. Undoing this requires effort and a sharp object to pop the "grill" back over the tabs. This simple protector stops this problem from happening.Designed in OpenSCAD.
This protective sleeve was designed to fit over the IKEA Kungsfors magnetic knife holder. The sleeve prevents knife edges from making direct contact with the metal surface, reducing the risk of chipping when placing or removing knives. The design slides over the holder and stays in place during normal use.
This privacy screen was designed to provide privacy by replacing the front grate of a box fan. It allows air to flow threw without allowing look in. Perfect if you want cool air and privacy! The grate was designed for a Lasko box fan but should work with other box fans.
This 280mm x 150mm robust crate was designed to hold root vegetables, but could be used for any heavy goods. This is being released as one of many simpler designs I made over the years.
This simple nasal strip holder was designed to be placed on a nightstand and keep things organized. The design is simple and trivial to change. This is being released as one of many simpler designs I made over the years.
This roller blind window clip was designed to be compatible with Gardinia. This clip was designed after the original one was broken and a replacement was needed. This design is definitively stronger than the original design.
This is my simple PanelDue 7i case for the Railcore II.
A quick multi material 3d print project I put together for a friend. These are used in the VERY fun (and freely available) Secret Hitler Game. If you like the game I would encourage you to support the creators by purchasing a pre printed card set from them.
This project was my first ever venture into 3D design. I had just acquired a 3D printer and wanted to print something out for myself. This was created in "Parts" mode in FreeCAD. In the end the design worked out well and I used it for many years.